The motors are usually used in conjunction with mechanical equipment and are a common power source. However, even a motor with good performance can emit noise during operation. These mechanical noises can affect the performance of equipment…

The vibration motor mainly relies on the vibration motor as the excitation source. When the vibrating motor is working, the high-speed rotation of the vibrating motor generates periodic high-frequency vibrations to the silo wall, so that th…

The motor is a device that converts electrical energy into kinetic energy. There are many types of motors, and the phenomena and causes of damage to different types of motors will vary. But to sum up, there are actually two major categories…

The cyclone can synthesize a new type of concentration process with the concentration unit. Using the rapid concentration effect of the cyclone, most of the coarse-grained tailings that are easy to thicken are separated from the tailings in…

In the daily work process of mine dewatering screen, a scientific and detailed maintenance plan should be formulated, especially the maintenance of the vibrating motor. Good maintenance can effectively improve the working efficiency and ser…

Once the cyclone of the fine sand recovery machine fails, the fine sand recovery machine will not produce sand, separate, or produce too much water. The following mainly lists the causes and solutions of the cyclone failure of the fine sand…

The pressure drop ratio of hydrocyclone refers to the ratio of the pressure drop between the inlet and the underflow port of the hydrocyclone to the pressure drop between the inlet and the overflow port, which is an important parameter indi…

The hydrocyclone has the functions of grading, concentration, and dehydration, especially in the treatment of tailings, with the advantages of small investment, high yield, and no future troubles. According to the existing experimental rese…

The concentration and fineness of the sedimentation should be detected in time to adjust the condition of the sedimentation and discharge of the hydrocyclone. Fluctuations in the concentration of sedimentation or "fineness of sedimentation"…

In beneficiation, hydrocyclones are mainly used for desliming, concentration, and classification operations in the grinding circuit, especially in fine grinding and classification operations. The sedimentation concentration of the hydrocycl…

Sizing the structural parameters of the hydrocyclone separator should according to the volume of the pulp to be processed and the particle size of the classification. Hydrocyclones are widely used in classification, desliming, dehydration, …

The hydrocyclone separator is a solid-liquid mixture classification equipment widely used in mining, petroleum, environmental protection, chemical, and other industries. The hydrocyclone separators are usually used in conjunction with the b…