The Installation of Linear Vibrating Screen Panel

Date: 2022-05-20     From: Longding     Author: admin

The linear vibrating screen is a new type of high-output vibrating screening equipment, which has the characteristics of high screening output, high precision, simple structure, and easy maintenance. The selection and installation of the linear vibrating screen mesh affect the efficiency and output of the linear screen. Installation according to the instructions can improve the performance of the linear vibrating screen and prolong the service time of the linear vibrating screen.

Choose the proper screen

1. The installation of the linear vibrating screen is relatively cumbersome. Therefore, it is necessary to choose a screen with a larger wire diameter.

2. When cutting the screen, care should be taken to keep the screen width consistent with the screen frame, and the length must be 50-70mm longer than the screen frame.

Install linear screen panel

1. The tension of the screen will directly affect the screening efficiency of the linear screen. Therefore, when installing the linear screen, the screen must be tightened.

2. According to the mesh number of the material to be screened and the difficulty of screening, it is determined to install the cleaning rubber ball.

3. When the mesh of the screen is high or the specific gravity of the material is large, a supporting net with a suitable mesh should be installed under the screen(The support net mainly plays a supporting role, which can effectively reduce the pressure of the material on the screen and prolong the service life of the screen).

4. When installing the pressure plate, care should be taken to maintain the flatness of the pressure plate, and even lock it with a sponge sealing tape with strong elasticity.

5. In order to avoid mixing materials, the linear screen frame must be assembled to the screen box as required, and the grown screen should be extended into the corresponding discharge port.

6. After the linear vibrating screen is installed as required, a small amount of material must be used to test the distribution and screening of the linear screen. The material is evenly conveyed forward, the classification is accurate, and there is no mixing phenomenon, the linear screen can be put into use; on the contrary, if there are uneven phenomena such as material deviation and accumulation, the flatness and uniformity of the screen surface of the linear screen should be adjusted.

In case of material mixing, check the sealing of the screen and whether it is pressed tightly. Correct selection and installation of linear vibrating screen mesh can effectively improve the screening efficiency and avoid unnecessary problems. Therefore, users of the linear screen should carefully select and install the screen according to the above method.